Microcement Furniture Melbourne

Microcement furniture in Melbourne

Microcement furniture is for people who want that seamless “monolithic” look: a dining table with no grout lines, a sculptural coffee table, a vanity that feels built into the wall, or a fireplace surround that looks like one solid piece. The appeal is simple: calm surfaces, refined texture, and an architectural finish that doesn’t rely on busy patterns.

The important part is that furniture isn’t a floor and it isn’t a wall. It gets touched, bumped, cleaned, moved, and used hard. So the result depends on the build underneath (rigidity), the edge detailing, and choosing a sealer that matches real use.

---

What we coat: tables, vanities, benches, fireplaces

Dining tables and coffee tables

Microcement tables are popular because they feel high-end and minimal. The key is rigidity. If the base flexes, the finish can crack over time. We’ll check the frame, substrate, and edge design, then build the system around how the table will be used.

Vanities and cabinetry panels

Vanities can look incredible when the finish runs seamlessly into the wall or floor. These are high-touch zones, often in bathrooms, so sealing matters. We also detail corners and edges properly so it doesn’t chip like a brittle skim coat.

Benchtops and splash zones (case-by-case)

Benchtops are possible, but they’re not a blanket “yes”. Heat, oil, acids, and aggressive cleaners can damage the wrong sealer. If you want a microcement bench, we design the build, edges, and sealer choice around your cooking habits and expectations.

Fireplace surrounds and built-ins

Fireplaces and built-ins are where microcement really shines. The finish adds depth without shouting. Heat zones need careful planning and correct materials, plus safe distances from direct flame and very high temperatures.

Want a consistent finish across the home? Microcement Bathrooms Melbourne • Microcement Flooring Melbourne • Microcement Walls Melbourne

---

Who microcement furniture is for (and who should avoid it)

Great fit if:

• You want a seamless, architectural look without grout lines or heavy texture.
• You’re happy to do the build properly: rigid base + correct prep + right sealer.
• You understand it’s a hand-finished surface with natural movement, not a factory laminate.
• You want a premium piece that feels custom and intentional.

Be cautious if:

• The piece will flex or be moved constantly and you don’t want to reinforce it.
• You want “indestructible”. Microcement is durable when sealed correctly, but sharp impacts can still chip edges.
• You want zero maintenance and you plan to use harsh chemicals or abrasives.

---

What we can coat (substrates and base build)

Furniture is all about the base. Microcement is thin, so it will mirror movement and weakness underneath. Our goal is a stable, compatible substrate that won’t flex.

Typically suitable (with the right prep)

• Compressed fibre cement sheeting / cement board builds
• Solid masonry / concrete bases
• Rigid MDF/ply builds (only when properly sealed/primed and braced)
• Existing sound stone or engineered surfaces (assessment required)

Needs assessment

• Timber furniture: timber moves with humidity. Often possible, but only with the right build and reinforcement strategy.
• Old coatings: paint, varnish, or unknown sealers must be tested for adhesion and compatibility.
• High-heat zones: fireplaces/areas near heat sources need careful material selection and detailing.

---

Build approach: what makes it last

The “premium look” comes from the layers you don’t see and the details you do see: crisp edges, consistent texture, and the right sealer for real life.

Typical build steps (varies by substrate)

1. Assessment: movement, rigidity, edge design, and use-case (dining, vanity, bench, heat/wet exposure).
2. Prep: degrease, sand, repair, prime, and stabilise the base as needed.
3. Reinforcement: mesh and edge strengthening where required.
4. Coats: build base coats and finish coats with correct drying times.
5. Sealing: choose the finish level and chemical resistance suited to the item.
6. Cure: protect the surface while it hardens and reaches full performance.

---

Durability: scratches, stains, chips

Microcement furniture can be very durable when built and sealed correctly, but it’s not the same as a factory quartz slab or laminate. Think of it like a premium architectural surface: it performs well, but it should be treated with basic care.

What affects durability most

• Sealer choice: different sealers perform differently with oils, acids, heat and cleaning chemicals.
• Edge detailing: sharp corners are more prone to chipping. We often recommend slight radius edges where possible.
• Rigidity: movement causes cracking. Furniture needs bracing and stable substrates.

Heat and wet zones

Vanities and wet area furniture need sealing designed for frequent wiping and moisture exposure. Fireplace surrounds and heat-adjacent areas require careful planning, safe detailing, and realistic expectations.

---

Cleaning and care (simple rules that keep it looking new)

• Use a soft cloth and a pH-neutral cleaner.
• Avoid abrasive pads and gritty powders.
• For tables and benches, wipe oils/coffee/wine early instead of letting it sit.
• Use trivets and chopping boards as normal good practice.

If you’ve got floors as well, your cleaning habits matter even more: Microcement cleaning & maintenance guide

---

How long does it take?

Timelines depend on size, prep, and cure time. As a rough guide:

• Small pieces (coffee tables, small vanities): commonly staged across several days including dry times and sealing.
• Larger pieces (dining tables, long benches, multiple items): staged coats + cure time, often across a longer window.
• Onsite items (built-ins/fireplace surrounds): needs protection from other trades during curing.

---

Microcement furniture cost in Melbourne (what drives pricing)

Furniture is priced less like “m² of wall” and more like a custom finish job. Prep, edges, and complexity matter more than raw area.

Main price drivers

• Substrate type and condition (how much stabilising/priming is needed)
• Edge design and detailing (corners, mitres, returns, lips)
• Item complexity (undermount sinks, tap penetrations, drawers/doors, curves)
• Sealer level required (high-touch dining vs vanity vs feature surround)
• Transport and access (offsite piece vs onsite built-in)

For a realistic range, send dimensions + photos: Book a consultation

---

Our process (how we avoid problems)

1. Confirm the use-case: table, vanity, bench, fireplace, built-in.
2. Check movement risk: rigidity, bracing, joinery quality, substrate condition.
3. Choose finish + sealer: based on touch, cleaning habits, moisture and heat.
4. Detail edges: corners and transitions designed to reduce chipping and wear.
5. Apply + cure: correct dry times, sealing, and protection while it hardens.

---

FAQ