Microcement Flooring Melbourne
Seamless Microcement Flooring in Melbourne
A continuous, grout-free finish designed for modern homes. Installed by specialist applicators. Book a consultation to confirm suitability for your floors.
Floors-focused. Melbourne-wide. Consultation first.
Overview
Microcement floors, done properly.
We focus on correct prep, stable substrates, and the right system selection so the finish performs long-term.
If you’re considering microcement for your floors, we start with a consultation to confirm suitability and scope.
Why it works
Why homeowners choose microcement
Designed for people who want a modern look without constant maintenance or visual clutter.
Seamless look
No grout lines. One continuous surface that makes spaces feel calmer and more refined.
Modern, matte finish
A soft, architectural look that suits contemporary interiors and neutral palettes.
Easy to maintain
A sealed surface designed for everyday living with the right care routine.
Process-driven install
Prep, stability checks, and correct system selection to minimise avoidable issues.
Colour range
Microcement colour range
Colour appearance can vary with lighting, texture choice, and sealing system. Samples are reviewed during consultation.
Transformation
Before & after microcement floors
Where suitable, we can apply microcement over existing surfaces to minimise demolition and downtime.
Investment
Typical investment
If you want a quick indication, the range below is a helpful starting point. Final pricing is confirmed after assessment.
Most microcement floors fall between $285–$315 / m²
Final pricing depends on prep + substrate. Confirmed after assessment.
Options
Microcement flooring options
Floor types we assess
• Over tiles (when stable)
• Internal living areas
• Light commercial (case-by-case)
Finish options
• Neutral and warm greys, stone tones, off-whites
• Subtle hand-trowelled texture (not glossy, not plastic-looking)
Care and maintenance
• Felt pads on furniture
• Wipe spills early
• Reseal guidance based on wear and use
Common question
Can microcement go over existing tiles?
We assess drummy or loose tiles, movement risk, moisture, and levels before recommending an over-tile system. If it’s not suitable, we’ll tell you what needs to change so you don’t pay twice.
How it works
Our process
A clean result starts with the substrate. We prioritise preparation and correct system selection.
01
Consultation
We review your goals, floor type, timeline, and suitability. If it’s not a fit, we’ll explain why.
02
Prep + substrate work
Stability checks, levelling where required, and reinforcement to manage movement risk.
03
Microcement application
Layered application to spec for consistency, texture control, and a clean finish.
04
Sealing + handover
Protective sealer applied and a clear care guide so it looks great long-term.
Fastest way to confirm suitability.
Suitability
Suitability matters
That’s why we start with a consultation. We’ll assess your existing surface, identify risks early, and recommend the best approach for a long-lasting finish.
Not sure what you have? Upload photos in the intake form and we’ll confirm.
Often suitable for
- Stable concrete slabs Existing tiles that are firmly bonded Internal living areas with low movement Floors that are reasonably level
May need a different approach
- Drummy or loose tiles High movement timber floors (case-by-case) Moisture issues or rising damp Significant unevenness without levelling
Compare
Microcement vs tiles vs polished concrete
Not “better for everyone” - just different. Here’s what to consider if you care about a clean, modern look and low visual clutter.
Microcement
• Modern, architectural finish
• Easier to keep visually clean
• Great for open-plan flow
• Texture + tone options (matte, warm stone, soft grey)
• Done properly, it’s tough and long-lasting
• Best results come from correct prep + sealing
Tiles / other
• Grout can discolour over time
• Lots of design choice, but can look busy
• Repairs often mean replacing sections/tiles
• Uneven tile edges can show under certain light
• Good option when microcement isn’t suitable (movement/moisture/substrate issues)
Service areas
Microcement flooring across Melbourne
We service Melbourne and surrounding suburbs. If you’re outside the list, still reach out - we can usually advise quickly.
Suburb checker
Type your suburb to confirm coverage and next steps.
Prefer a quick answer? Send your suburb + approximate m² and we’ll advise.
Try one of these:
Not sure what to send?
Finish examples
Microcement flooring gallery
Real finishes vary slightly depending on substrate, light, texture choice, and sealing system. If you want a specific tone, we’ll guide you during the consultation.
FAQs
Can microcement be installed over tiles?
Does microcement crack?
Is microcement slippery?
How do you clean microcement?
How long does microcement last?
What areas is microcement best for?
Next step
Book a consultation to confirm suitability
Complete the intake and book a time. We’ll review your floor type, assess risks early, and recommend the best path forward for a long-lasting microcement finish.
Book a ConsultationLighting and sealing can affect appearance.
Ready to check suitability?
Book a consult and we’ll confirm the best approach for your floor.
Comparing microcement to tiles?
If you're weighing up microcement flooring vs tiles for your Melbourne home, we've put together a detailed guide covering durability, maintenance, waterproofing, costs, and when microcement can go over existing tiles.