Penthouse, St Kilda
Five bathrooms — floors, walls and ceilings · 15 working days
ARCHITECTURAL MICROCEMENT · MELBOURNE
Continuous surfaces for considered spaces.
MicroLux prepares and installs seamless Italian microcement for homes, architects and commercial projects across Melbourne. One system, documented from substrate to sealer.
- Insured to $20M
- Our own police-checked, White Card-certified team
- Atria-certified
- 10-year product and 5-year workmanship warranties
WHO WE WORK WITH
One standard, whoever is at the table.
Homeowners
Bathrooms, floors and walls for homes being renovated or built, applied over existing surfaces or as part of a full renovation.
For your home →Architects & Designers
Architectural microcement you can specify with confidence. The system, the substrate requirements and the detailing, documented.
Specify MicroLux →Builders & Commercial
A specialist finishing trade that programs around yours, with clear site requirements, fixed durations and one point of responsibility for the finish.
Work with us →SELECTED WORK
Recent projects.
Residence, Malvern
Two bathrooms and two powder rooms — floors and all walls, finished straight over the existing tiles · 9 working days
Bathroom, Ensuite & Kitchen, Malvern
A bathroom and an ensuite finished straight over the existing tiles, plus the kitchen back wall and rangehood · 6 working days
New build, Pascoe Vale
Ground-floor living floor · 7 working days
THE APPROACH
Three things decide how a surface performs.
The System.
Atria Super Titanium, made in Sicily since 1968. One manufacturer's system from primer to sealer, never mixed with other products.
The Preparation.
Every substrate is tested for moisture, movement and soundness before work starts, and the findings go into a written Site Assessment report.
The Installation.
Applied by our own Atria-certified team, photographed and reported every working day, and handed over with both warranties in writing.
THE SYSTEM
A surface is only as good as what’s underneath it.
Every layer, from the bonding primer to the protective topcoat, comes from one manufacturer in Sicily. Each coat cures fully before the next goes on.
CONCRETE SLAB
- 5New Atriapol W Antibacterial · 2 coats0.085–0.100 L/m² per coat · UV-stable, matt or gloss
- 4Atriafloor Filler · 1 coatCloses every pit and pore. Standard on floors
- 3Atria Super Titanium BC · 2 coats0.8–1 mm · quartz, marble sand and Etna mineral, hand-trowelled
- 2Atriafloor Rasante One · 2 coats≈2 kg/m² · fills the grout lines and levels the tile face
- 1Atriafloor Primer1 coat · 100–150 g/m² · epoxy bond to glazed tile
MICROLUX FINISHES
SYSTEM SECTION · FLOOR · OVER EXISTING TILES
DRG 01
NOT TO SCALE · THICKNESS EXAGGERATED
HOW WE WORK
Documented from first visit to handover.
Site Assessment report.
Moisture readings, substrate findings and photos, in writing, before any price is given.
Fixed-price proposal.
One written price and program, plus a physical sample of the colour and texture to approve.
Daily updates.
A photo update at the end of every working day on site.
Handover pack.
Care guide, 10-year product and 5-year workmanship warranties, and a check-up at 24 months.
BETTER BUILT
Less demolition. Healthier interiors.
No demolition waste.
Applied over sound existing tiles and surfaces, so there's no rip-out, no skip bin and no old tiles going to landfill. Less dust and noise in your home, too.
Water-based, low-VOC.
Every layer of the Atria system, from primer to topcoat, is water-based and low in volatile organic compounds.
Antibacterial topcoat.
The manufacturer declares antibacterial performance for New Atriapol Antibacterial, tested to ISO 22196:2011.
CLIENTS
In their words.
“Microlux was much more than just another microcement outfit… The finish is genuinely second to none.”
“The difference was Alex. He was the only one who really looked at the floor instead of just measuring it and talking about colours.”
“We finished building our home a few months ago and without a doubt, the bathrooms are everyone's favourite part.”
PROJECT ASSURANCE
Commitments in writing.
A fixed price, an agreed program with compensation if we finish late, a 10-year product warranty and a 5-year workmanship warranty that both transfer if you sell, and $20M public liability cover.
Read Project Assurance →THE GUIDE
Before you decide.
Will it crack? An honest answer
Why microcement cracks, and how substrate preparation and movement joints prevent it.
Read the article →Waterproofing, showers and wet areas, explained simply
What the finish does, what the membrane does, and how the two work as one system.
Read the article →Seamless floors compared
Tiles, timber, hybrid and polished concrete, set side by side.
Read the article →Tell us about your project.
From a single room to a full architectural program. We reply within one business day.